download BRAKE PRESSURE REGULATOR NOTE: CAUTION: DO NOT adjust pressure
regulator with brake pedal depressed. 1) Ensure fuel tank is full and
spare tire is in trunk. Raise and support vehicle. Attach Pressure
Gauges (VAG 1310) to left front brake caliper and right rear brake
caliper/cylinder. Bleed pressure gauge and hoses through valve on
gauges. 2) Lower vehicle and bounce rear of vehicle several times. Press
on brake pedal until front brake pressure gauge reading equals pressure
listed in 1st Reading column of BRAKE PRESSURES table. Hold brake
pressure. Rear brake pressure gauge reading should be within
specification in 1st Reading column of BRAKE PRESSURES table. 3)
Release
brake pedal. Press on brake pedal until front brake pressure gauge
reading equals pressure listed in 2nd Reading column of BRAKE PRESSURES
table. Hold brake pressure. Rear brake pressure gauge reading should be
within specification in 2nd Reading column of BRAKE PRESSURES table. 4)
Adjust spring tension on brake pressure regulator if rear brake pressure
for 1st and/or 2nd reading is not within specification. Decreasing
spring tension will reduce system pressure. Increasing spring tension
will increase system pressure. Recheck regulator pressures and re-adjust
regulator as needed. BRAKE PRESSURES TABLE1st Reading 2nd Reading
Application psi (Bar) psi (Bar) Front Gauge Rear Gauge Brake pressure
regulator is mounted on a bracket near rear trailing arm.