download Note: Removal and installation of right headlamp is illustrated.
Removal and installation of left headlamp is the same. Special tools,
testers and auxiliary items required 5 mm hex socket wrench Removing
Insert hex wrench into headlamp lock – arrow – . Turn hex socket wrench
– 1 – approximately 180 degree in direction of – arrow – (clockwise) in
order to release headlamp housing from retainer. Return the headlamp
lock – 1 – 90 degree as shown. Note: In order for the headlamp housing
to slide in an out freely, the “U” section of the headlamp lock must be
in the lowest position (90 degree ). Should the headlamp be difficult
to remove from vehicle, turn hex socket wrench – 1 – alternately in both
directions while pulling headlamp housing out of retainer. Note:
Headlamp retainer – 1 – contains headlamp
lock – 2 – position
(lock-unlock). Depress lock tab – arrow – while pulling headlamp forward
out of retainer. Note: The electrical connection is integrated with
both the headlamp and retainer and is disconnected automatically upon
removal of headlamp. CAUTION! Headlamp lock on retainer must not be
turned while headlamp is removed. . Installing Install in reverse
order of removal, noting the following: Note: In order for the
headlamp housing to slide in an out freely, the “U” section of the
headlamp lock must be in the lowest position (90 degree ). Should
headlamp housing be difficult to install in vehicle, turn hex socket
wrench – 1 – alternately in both directions while pushing headlamp
housing into retainer.