download Note: The following points are essential to ensure correct selector
adjustment: Operating and transfer elements of selector mechanism must
be in proper condition. Selector mechanism must move freely. The
transmission, clutch and clutch mechanism must also be in proper
condition. Transmission in neutral position. Carefully pry cover off
from center console. Vehicles up to October 00 Remove shift knob with
cover. Vehicles as of November 00 Break clamp – arrow – and pull shift
knob off with cover. Continued for all vehicles The selector housing
cover must be unbolted – arrows – .
Measure distance between body and
selector mechanism. The distance – a – must be 43 mm. If this is not
the case, adjust distance – a – as follows: Loosen bolt – arrow – for
push rod. The connection of push rod to selector mechanism must move
freely. Set to dimension – a – by moving selector mechanism. Tighten
bolt – arrow – for push rod to torque specification .